1-800-321-9947 | Sales Support | Tech Support

StrongArmCrash M30 NP

StrongArmCrash M30 NP
Anti-Ram Crash Barrier Arm M30 (K4) Non-Powered
STRONGARM M30 NP reliably defends high hecurity sites world-wide. Install in low cycle sites with no electrical power. This manually operated, crash certified ASTM F2656-07 M30, P1* barrier arm provides incomparable security and safety. Unique dual arm design prevents a large truck or a small passenger vehicle from breaching the security perimeter. Bright reflective tape, on both arms, boosts visibility. The lower arm, at bumper height, reduces possible injury or death from an accidental passenger-car gate-strike. Shields and enclosed hydraulics further safeguard authorized personnel. HySecurity backs an unequalled 5-year reliability/quality assurance warranty.

Manually operated rotary hand crank in locked enclosure pumps hydraulic fluid to open barrier arm in approximately 60 to 120 seconds depending on arm length. Close time is approximately 15 to 25 seconds. Standard hot dipped galvanized steel chassis provides optimum corrosion protection. Choose optional finish of textured, ultra-durable “Signal Yellow” powder coat over zinc plate for an enduring, attractive finish. Reduce foundation set-up time and ensure accuracy with supplied templates. Retro-fit motorized option if you choose to add power later.
Note: CALL FOR QUOTE. Completed and signed Fortified Crash Barrier application, agreement and operator order form required. ONLY HYSECURITY AUTHORIZED DISTRIBUTORS AND INSTALLERS, trained by HySecurity in proper installation techniques, operation and maintenance, are eligible to purchase HySecurity’s Fortified Crash Barrier products. Training is periodically available and is required prior to the actual purchase or to receive Crash Project installation leads and referrals from HySecurity. See Crash Training at www.hysecurity.com.

Operator Specifications
Sales Literature
Installation Manuals
Photos
Manually Operated StrongArm M30
Manually Operated StrongArm M30