1-800-321-9947 | Sales Support | Tech Support

StrongArmCrash M30

StrongArmCrash M30
Anti-Ram Crash Barrier Arm M30 (K4) Open/Close: 6s to 8s
STRONGARM M30 reliably defends high security sites world-wide. This high duty cycle, crash certified ASTM F2656-07 M30, P1 barrier arm provides incomparable security and safety using proven controls and hydraulics perfected over decades in the most challenging conditions. Unique dual arm design prevents a large truck and a small passenger vehicle from breaching the security perimeter. Bright LED arm lighting and highly reflective tape on the upper arm, plus a standard traffic light, boost visibility and inhibit accidental impact. The lower arm, at bumper height, reduces possible injury or death from an accidental passenger-car gate-strike. Shields and enclosed controls and hydraulics further safeguard authorized personnel. Integrated, locking hydraulics and highly programmable controls and user relays simplify and reduce the cost of installation and operation. HySecurity backs an unequalled 5-year reliability/quality assurance warranty.

StrongArmCrash barrier arms open/close in 6 to 8 seconds with an Emergency Fast Close time of 5 to 7 seconds. Standard hot dipped galvanized steel chassis provides optimum corrosion protection. Choose optional finish of textured, ultra-durable “Signal Yellow” powder coat over zinc plate for an enduring, attractive finish. Operator ships with one traffic light. Reduce foundation set-up time and ensure accuracy with supplied templates. The StrongArmCrash ExtremeCycle option, for extremely high cycle sites, increases cycles from 100 up to 150 - 200 cycles/hr. Very few sites require more than the 100 cycles/hr already delivered by the standard StrongArmCrash barrier arms.

Easily configure gate operation to specific site requirements with unequalled Smart Touch Controller. PC software simplifies configuration and troubleshooting using Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.). Upload latest software, troubleshoot system and save operator configurations. Programmable dual or sequenced gate integration. Powerful anti-tailgating configuration. Three configurable user relays plus optional Hy8Relay™ - an accessory module providing eight additional programmable relay outputs.

Connect and Report: Optional web based HyNet™ Gateway connects the perimeter gates/barriers with your security monitoring station. Securely report gate system tailgating, gate hits, failure to operate, and more, in real time to maintain perimeter security. Additionally, configure email alerts to communicate issues to installer, facility or security responders.
Note: CALL FOR QUOTE. Completed and signed Fortified Crash Barrier application, agreement and operator order form required. ONLY HYSECURITY AUTHORIZED DISTRIBUTORS AND INSTALLERS, trained by HySecurity in proper installation techniques, operation and maintenance, are eligible to purchase HySecurity’s Fortified Crash Barrier products. Training is periodically available and is required prior to the actual purchase or to receive Crash Project installation leads and referrals from HySecurity. See Crash Training at www.hysecurity.com.

HySecurity offers an optional AC Power Supply w/HyInverter AC™ which provides UPS battery backup for 208/230VAC, single-phase AC gate operators.

Operator Specifications
Sales Literature
Installation Manuals
Photos
Double your security
Double your security
Manually Operated StrongArm M30
Manually Operated StrongArm M30
M30 arms open to full 90°
M30 arms open to full 90°
Petrochemical
Petrochemical
StrongArmCrash M30 with SwingSmart
StrongArmCrash M30 with SwingSmart
M30 Crash Test
M30 Crash Test
Inside the M30 - Hydraulic side
Inside the M30 - Hydraulic side
Inside the M30 - Electrical side
Inside the M30 - Electrical side