1-800-321-9947 | Sales Support | Tech Support

StrongArm 20 UPS

StrongArm 20 UPS
UPS backup, barrier arm, 20 ft (6 m), Open/Close: 3s/4s
STRONGARM 20 with UPS BACKUP is a powerful, rugged, industrial grade, hydraulic barrier arm operator that exceeds all operator reliability, longevity, maintenance and security standards. Smoothly cycle a formidable 2 x 5 inch aluminum arm without fail for decades. Lowest total cost of ownership. The Uninterruptible DC Power Supply provides 300 cycles UPS backup after an AC power loss.*

Open a 20 ft arm, to a full 90°, in 3 seconds. Arm will remain vertical when held open. Side mount arms up to 18 ft. Center yoke mount for arms up to 20 ft. Aluminum or fiberglass arm options. Few moving parts, all enclosed in secure, strong uni-body 10 gauge welded and zinc plated steel chassis. Powder coat safety yellow for high visibility and an enduring, attractive finish. Keyed T-lock option protects all electrical controls and parts from vandalism. Optional arm light kit.

Retain full functionality during an AC power outage using HySecurity’s advanced DC Power Supply with HyCharger DC™, a powerful 50A three stage charger, custom built for continuous duty and long battery life. The DC Power Supply is a separate insulated and ventilated enclosure containing two sealed maintenance free AGM 110Ah, 12VDC batteries. Available in single phase only: Low voltage: 115V 60/50 Hz (requires 30A circuit) or High voltage: 208-230V 60/50 Hz (requires 15A branch circuit). Be certain to order the correct HyCharger DC™ voltage model as chargers are not field convertible.

Easily configure gate operation to specific site requirements with unique and unequalled Smart Touch Controller. PC software simplifies configuration and troubleshooting using Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.). Upload latest software, troubleshoot system and save operator configurations. Programmable dual or sequenced gate integration. Three configurable user relays plus optional Hy8Relay™ - an accessory module providing eight additional programmable relay outputs.

Connect and Report: Optional web based HyNet™ Gateway connects the perimeter gates/barriers with your security monitoring station. Securely report gate system tailgating, gate hits, failure to operate, and more, in real time to maintain perimeter security. Additionally, configure email alerts to communicate issues to installer, facility or security responders.
Note: HySecurity’s DC Power Supply enclosure must be mounted within 10 ft (3 m) of the operator with a minimum of 6 gauge wire used to connect between the DC supply and gate operator. For longer distances, call HySecurity Tech Support. Barrier arm and arm mounting bracket prices are not included in StrongArm base prices. See “StrongArm Options” for arm configurations and arm assembly prices. Arms 20 ft or longer require counterweights. Wood arms up to 14 ft (4.3 m) maximum.

Operator Specifications
Sales Literature
Installation Manuals
Photos
Industrial
Industrial
Secure uni-body welded chassis
Secure uni-body welded chassis
Full 90° open
Full 90° open