| Duty Cycle | 100 cycles/hr, option for continuous duty |
| Arm Speed | 6 to 8 seconds depending on arm length |
| Efc Time | 5 to 7 seconds depending on arm length |
| Clear Opening | 12 to 24 ft in 2 ft increments (366 to 732 cm in 61 cm increments). Call for custom arm length. |
| Full Open Angle | 90º |
| Ingress Protection | IP56 |
| Operator HP | 2 hp |
| Drive Type | Hydraulic |
| Single Phase Voltages | 208/230V 60/50Hz |
| Three Phase Voltages | 208/230V 60/50Hz or 380/460V 60/50Hz |
| Temperature Rating | -40° to 158° F (-40° to 70° C) or -10° to 158° F (-23° to 70° C) Using biodegradeable fluid. No heater necessary. |
| Communication | RS-232, RS-485; Ethernet/fiber using optional HyNet™ Gateway accessory |
| User Controls | Smart Touch Controller with 70+ configurable settings. Smart Touch keypad and 32 character, OLED display or a PC using S.T.A.R.T. software. |
| Relays | Two configurable user relays: 250VAC, 10A electromechanical; Optional Hy8Relay™ for 8 additional relay outputs |
| App Class Controls | Control panel certified to UL 508A by ETL |
| Finish Type | Hot dipped galvanized standard. Optional textured yellow powder coat over zinc plating. |
| Foundation | 6 x 6 x 4 ft (183 x 183 x 122 cm) 4,000 psi concrete, #6 rebar, grade 60 |
| Warranty | 5 year |
| * | Contact HySecurity to receive a copy of the ASTM F2656-07 M50-P2 Crash Test Certification. StrongArm M50 received a P2 rating with penetration limited to 1.17 m. |