1-800-321-9947 | Sales Support | Tech Support

SlideDriver 200-C UPS

SlideDriver 200-C UPS
Corrections, UPS backup, heaviest gates, 20,000 lb, 1 ft/s
SLIDEDRIVER 200 CORRECTIONS with UPS BACKUP is a powerful, rugged, continuous duty, industrial grade, hydraulic slide gate operator that exceeds all operator reliability, longevity, maintenance and security standards. Cycling the heaviest, longest gates imaginable, it''s double-wide, four wheel drive, hydraulic gate operator utilizes HySecurity''s XtremeDrive™ system for maximum pull force It is specifically designed for prisons, law enforcement, court systems or other high security applications where ultimate security is critical. Three high security lock options* provided, plus an extra heavy 10-gauge cover for added protection. The Uninterruptible DC Power Supply provides up to 2,000 ft of UPS backed-up gate travel after AC power loss.*

HySecurity correctional facility gate operators come standard with all the software and additional control wiring needed to interface with the many options and interlocks commonly used at correctional facilities, such as gate position outputs, interlock capability for sally ports or sequenced gates, and multiple relays for an external solenoid lock or other customizable options.

Cycle up to 20,000 lb gates at 1 ft/s. The SlideDriver 200 is equipped with two AdvanceDrive™ wheels that run on the top of the drive rail and two XtremeDrive™ pinion wheels* which engage a rack on the underside of the drive rail. This increases the pull force for the longest, heaviest industrial and high security gates. The robust 10 gauge steel chassis protects all moving parts and controls from vandalism and sabotage. Powder coating over zinc plate provides excellent abrasion and corrosion resistance for an enduring, attractive finish.

Retain full functionality during an AC power outage using HySecurity’s advanced DC Power Supply with HyCharger DC™, a powerful 50A three stage charger, custom built for continuous duty and long battery life. The DC Power Supply is a separate insulated and ventilated enclosure containing two sealed maintenance free AGM 110Ah, 12VDC batteries. Available in single phase only: Low voltage: 115V 60/50Hz (requires 30A branch circuit) or High voltage: 208-230V 60/50Hz (requires 15A branch circuit). Be certain to order the correct HyCharger DC™ voltage model as chargers are not field convertible.

Easily configure gate operation to specific site requirements with unique and unequalled Smart Touch Controller. PC interface provided for easy configuration and quick troubleshooting using Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.). Upload latest software, troubleshoot system and save operator configurations. Programmable dual gate or sequenced gate integration. Three configurable user relays plus optional Hy8Relay™ - an extended relay module providing eight additional programmable relay outputs.

Monitor gate system and accessory status, system operational malfunctions, maintenance alerts, or gate breach alarms. Communicate security or operational events to security command and control or service technician in real time via Ethernet/fiber using optional web based HyNet™ Gateway. Target specific security and operational alerts to specific recipients. View or download 16,000 plus events (logged in non-volatile memory) from a remote location or on-site for precise and quick system troubleshooting. Operate and configure gate remotely.

Listed and restricted to UL 325 usage class III, IV.
Note: *Actual duty cycle depends on site specific conditions and gate configuration. Be certain to order correct voltage. Field conversion is not convenient or recommended. HySecurity’s DC Power Supply enclosure must be mounted within 10 ft (3 m) of the operator with the main AC power wire 6 gauge minimum. For longer distances, call HySecurity Tech Support. See Options & Accessories for lock options. Solenoid lock is not available with UPS models. *XtremeDrive™ System (patent pending) requires HySecurity XtremeDrive™ rack and a drive rail. The price for the SlideDriver 200 includes 52 ft (16 m) of rack, but no drive rail. To ensure compatibility, we recommend HySecurity’s grooved (flangeless) drive rail or a steel/aluminum angle iron be used at the site. If mounting XtremeDrive to a flanged drive rail, the clearance between the flanges must be a minimum of 2 inches (5 cm). To enable fully automatic operation, this operator requires a MINIMUM of one external entrapment protection sensor to monitor potential entrapment zones in either the open or close direction of travel. Visit www.hysecurity.com/gatesafety for a current list of external entrapment protection sensors and sensor accessories tested by UL or ETL for use in HySecurity gate operators.

Operator Specifications
Sales Literature
Installation Manuals