1-800-321-9947 | Sales Support | Tech Support

SlideDriver 200 UPS

SlideDriver 200 UPS
UPS backup, industrial, heaviest gates, 20,000 lb, 1 ft/s
SLIDEDRIVER 200 with UPS BACKUP is a powerful, rugged, industrial grade, hydraulic slide gate operator that exceeds all operator reliability, longevity, maintenance and security standards. It cycles the heaviest, longest gates imaginable. It''s a double-wide, four wheel drive hydraulic gate operator utilizing HySecurity''s XtremeDrive™ system for maximum pull force. The Uninterruptible DC Power Supply provides up to 2,000 ft of gate travel after AC power loss.*

Cycle up to 20,000 lb gates at 1 ft/s. The SlideDriver 200 is equipped with two AdvanceDrive™ wheels that run on the top of the drive rail and two XtremeDrive™ wheels which engage a rack on the underside of the drive rail. This increases the pull force for the longest, heaviest industrial and high security gates. The robust 10 gauge steel chassis protects all moving parts and controls from vandalism and sabotage. The powder coat over zinc plate provides excellent abrasion and corrosion resistance for an enduring, attractive finish.

Retain full functionality during an AC power outage using HySecurity’s advanced DC Power Supply with HyCharger DC™, a powerful 50A three stage charger, custom built for continuous duty and long battery life. The DC Power Supply is a separate insulated and ventilated enclosure containing two sealed maintenance free AGM 110Ah, 12VDC batteries. Available in single phase only: Low voltage: 115V 60/50Hz (requires 30A branch circuit) or High voltage: 208-230V 60/50Hz (requires 15A branch circuit). Be certain to order the correct HyCharger DC™ voltage model as chargers are not field convertible.

Easily configure gate operation to specific site requirements with unequalled Smart Touch Controller. PC software simplifies configuration and troubleshooting using Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.). Upload latest software, troubleshoot system and save operator configurations. Programmable dual or sequenced gate integration. Three configurable user relays plus optional Hy8Relay™ - an accessory module providing eight additional programmable relay outputs.

Connect and Report: Optional web based HyNet™ Gateway connects the perimeter gates/barriers with your security monitoring station. Securely report gate system tailgating, gate hits, failure to operate, and more, in real time to maintain perimeter security. Additionally, configure email alerts to communicate issues to installer, facility or security responders.

Listed and restricted to UL 325 usage class III, IV.
Note: HySecurity’s DC Power Supply enclosure must be mounted within 10 ft (3 m) of the operator with a minimum of 2 gauge wire used to connect between the DC supply and gate operator. For longer distances, call HySecurity Tech Support. Solenoid lock is not available with UPS models. XtremeDrive™ System (patent pending) requires HySecurity XtremeDrive™ rack and a drive rail. Price includes 52 ft (16 m) of rack, but no drive rail. To ensure compatibility, we recommend HySecurity’s grooved (flangeless) drive rail or a steel/aluminum angle iron be used at the site. If mounting XtremeDrive to a flanged drive rail, the clearance between the flanges must be a minimum of 2 inches (5 cm).

To enable fully automatic operation, this gate operator requires a MINIMUM of one external entrapment protection sensor to monitor potential entrapment zones in either the open or close direction of travel. Visit www.hysecurity.com/gatesafety for more information on UL 325 standards and gate safety.

Operator Specifications
Sales Literature
Installation Manuals
Photos
Snowbrush and snow scraper kit
Snowbrush and snow scraper kit
Base Extension
Base Extension
XtremeDrive™ System
XtremeDrive™ System
UPS dependability
UPS dependability
Cycling the heaviest, longest gates
Cycling the heaviest, longest gates