1-800-321-9947 | Sales Support | Tech Support

SlideDriver 200

SlideDriver 200
Industrial, heaviest gates, 20,000 lb, 1 ft/s
SLIDEDRIVER 200 is a powerful, rugged, continuous duty, industrial grade, hydraulic slide gate operator that exceeds all operator reliability, longevity, maintenance and security standards. It cycles the heaviest, longest gates imaginable, including those securing airport runways. It''s a double-wide, four wheel drive hydraulic gate operator utilizing HySecurity''s XtremeDrive™ system for maximum pull force.

Cycle up to 20,000 lb gates at 1 ft/s. The SlideDriver 200 is equipped with two AdvanceDrive™ wheels that run on the top of the drive rail and two XtremeDrive™ wheels which engage a rack on the underside of the drive rail. This increases the pull force for the longest, heaviest industrial and high security gates. The robust 10 gauge steel chassis protects all moving parts and controls from vandalism and sabotage. Powder coating over zinc plate provides excellent abrasion and corrosion resistance for an enduring, attractive finish.

Easily configure gate operation to specific site requirements with unequalled Smart Touch Controller. PC software simplifies configuration and troubleshooting using Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.). Upload latest software, troubleshoot system and save operator configurations. Programmable dual or sequenced gate integration. Three configurable user relays plus optional Hy8Relay™ - an accessory module providing eight additional programmable relay outputs.

Connect and Report: Optional web based HyNet™ Gateway connects the perimeter gates/barriers with your security monitoring station. Securely report gate system tailgating, gate hits, failure to operate, and more, in real time to maintain perimeter security. Additionally, configure email alerts to communicate issues to installer, facility or security responders.

Listed and restricted to UL 325 usage class III, IV.
Note: XtremeDrive™ System (patent pending) requires HySecurity XtremeDrive™ rack and a drive rail. Price includes 52 ft (16 m) of rack, but no drive rail. To ensure compatibility, we recommend HySecurity’s grooved (flangeless) drive rail or a steel/aluminum angle iron be used at the site. If mounting XtremeDrive to a flanged drive rail, the clearance between the flanges must be a minimum of 2 inches (5 cm).

To enable fully automatic operation, this gate operator requires a MINIMUM of one external entrapment protection sensor to monitor potential entrapment zones in either the open or close direction of travel. Visit www.hysecurity.com/gatesafety for more information on UL 325 standards and gate safety.

Operator Specifications
Sales Literature
Installation Manuals
Photos
Move large and heavy gates
Move large and heavy gates
Smooth operation even in extreme weather
Smooth operation even in extreme weather
Optional snowbrush scrapers
Optional snowbrush scrapers
Highest security
Highest security
Cycle up to 20,000 lb gates at 1 ft/s.
Cycle up to 20,000 lb gates at 1 ft/s.