1-800-321-9947 | Sales Support | Tech Support

SlideDriver 30F

SlideDriver 30F
Fast, industrial, 3,000 lb gate, 1.7 ft/s
SLIDEDRIVER 30F is a powerful, rugged, continuous duty, FAST, industrial grade, hydraulic slide gate operator that exceeds all operator reliability, longevity, maintenance and security standards. This model quickly glides a slide gate at 20 in/s, almost twice the speed of traditional slide gate operators.

SlideDriver 30F’s soft-start system (key to smoothly moving slide gates faster than 1 ft/s) combined with a high flow rate pump, cycles heavy gates quickly (up to 3,000 lb). Brake valves, AWOG and hydraulic drive, create smooth, easy-on-gate-hardware operation. Powerful hydraulic motors rotate two compressed polyurethane AdvanceDrive™ wheels, smoothly cycling a rigid drive rail/gate. Its robust 12 gauge steel chassis protects all moving parts and controls from vandalism and sabotage. Powder coating over zinc plate provides excellent abrasion and corrosion resistance for an enduring, attractive finish.

Easily configure gate operation to specific site requirements with unequalled Smart Touch Controller. PC software simplifies configuration and troubleshooting using Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.). Upload latest software, troubleshoot system and save operator configurations. Programmable dual or sequenced gate integration. Three configurable user relays plus optional Hy8Relay™ - an accessory module providing eight additional programmable relay outputs.

Connect and Report: Optional web based HyNet™ Gateway connects the perimeter gates/barriers with your security monitoring station. Securely report gate system tailgating, gate hits, failure to operate, and more, in real time to maintain perimeter security. Additionally, configure email alerts to communicate issues to installer, facility or security responders.

Listed and restricted to UL 325 usage class III, IV due to high speed.
Note: Order optional XtremeDrive™ System (patent pending) in locations where roll resistant gates or harsh snow and ice conditions risk loss of drive wheel traction. XtremeDrive™ System increases traction with its innovative rack & pinion-like design.

To enable fully automatic operation, this gate operator requires a MINIMUM of one external entrapment protection sensor to monitor potential entrapment zones in either the open or close direction of travel. Visit www.hysecurity.com/gatesafety for more information on UL 325 standards and gate safety.

Operator Specifications
Sales Literature
Installation Manuals
Photos
Move gate at 20 in/s
Move gate at 20 in/s
Built to last
Built to last
Inside the SlideDriver electrical enclosure
Inside the SlideDriver electrical enclosure
Soft-Start system moves your slide gate FAST
Soft-Start system moves your slide gate FAST
AdvanceDrive™ wheels
AdvanceDrive™ wheels
Smoothly move your gate
Smoothly move your gate