1-800-321-9947 | Sales Support | Tech Support

SlideDriver 50VF2/3

SlideDriver 50VF2/3
Fast, industrial, 5,000 lb gate, 2.2 or 3 ft/s, EFC 3 ft/s
SLIDEDRIVER 50VF2/3 is a powerful, rugged, continuous duty, industrial grade, hydraulic slide gate operator that exceeds all operator reliability, longevity, maintenance and security standards. Moves a heavy gate SMOOTHLY and FAST, up to 3 ft/s. These operators close gates to a precise point and are extremely easy on gate hardware.

SlideDriver VF operators use a variable frequency drive, 8 inch wheels - both wheels driven, and a high flow rate pump to move gates weighing up to 5,000 lb at high speed. Field adjustable Open/Close speeds are 2.2 or 3 ft/s. In an emergency situation, press and hold button for Emergency Fast Close at 3 ft/s. Powerful hydraulic motors rotate two compressed polyurethane AdvanceDrive™ wheels, smoothly cycling a rigid drive rail/gate. The robust 12 gauge steel chassis protects all moving parts and controls from vandalism and sabotage. Powder coating over zinc plate provides excellent abrasion and corrosion resistance for an enduring, attractive finish.

Easily configure gate operation to specific site requirements with unequalled Smart Touch Controller. PC software simplifies configuration and troubleshooting using Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.). Upload latest software, troubleshoot system and save operator configurations. Programmable dual or sequenced gate integration. Three configurable user relays plus optional Hy8Relay™ - an accessory module providing eight additional programmable relay outputs.

Connect and Report: Optional web based HyNet™ Gateway connects the perimeter gates/barriers with your security monitoring station. Securely report gate system tailgating, gate hits, failure to operate, and more, in real time to maintain perimeter security. Additionally, configure email alerts to communicate issues to installer, facility or security responders.

Listed and restricted to UL 325 usage class III, IV due to high speed.
Note: Order optional XtremeDrive™ System (patent pending) in locations where roll resistant gates or harsh snow and ice conditions risk loss of drive wheel traction. XtremeDrive™ System increases traction with its innovative rack & pinion-like design.

To enable fully automatic operation, this gate operator requires a MINIMUM of one external entrapment protection sensor to monitor potential entrapment zones in either the open or close direction of travel. Visit www.hysecurity.com/gatesafety for more information on UL 325 standards and gate safety.

HySecurity offers an optional AC Power Supply w/HyInverter AC™ which provides UPS battery backup for 208/230VAC, single-phase AC gate operators.

Operator Specifications
Sales Literature
Installation Manuals
Photos
Move a heavy gate SMOOTHLY and FAST
Move a heavy gate SMOOTHLY and FAST
Move up to 5,000 lb gates in 2.2 or 3 ft/s
Move up to 5,000 lb gates in 2.2 or 3 ft/s
SlideDriver 50VF 2/3
SlideDriver 50VF 2/3
Built to last
Built to last