1-800-321-9947 | Sales Support | Tech Support

SlideDriver 80-C

SlideDriver 80-C
Corrections, heavy gate, 8,000 lb, 1 ft/s
SLIDEDRIVER 80 CORRECTIONAL FACILITIES MODEL is a powerful, rugged, continuous duty, industrial grade, hydraulic slide gate operator that exceeds all operator reliability, longevity, maintenance and security standards. Our most powerful two-wheel drive, hydraulic slide gate operator is designed for VERY heavy or long gates. It is specifically designed for prisons, law enforcement, court systems or other high security applications where ultimate security is critical. Three high security lock options provided, plus an extra heavy 10-gauge steel cover for added protection.

HySecurity correctional facility gate operators come standard with all the software and additional control wiring needed to interface with the many options and interlocks commonly used at correctional facilities, such as gate position outputs, interlock capability for sally ports or sequenced gates, and multiple relays for an external solenoid lock or other customizable options.

Cycle up to 8,000 lb gates at 1 ft/s. The SlideDriver 80 is equipped with an AdvanceDrive wheel that runs on the top of the drive rail and an XtremeDrive™ wheel which engages a rack on the underside of the drive rail. This increases the pull force for large heavy industrial and high security gates. Powerful hydraulic motors rotate two compressed polyurethane AdvanceDrive™ wheels, smoothly cycling a rigid drive rail/gate. The robust 12 gauge steel chassis protects all moving parts and controls from vandalism and sabotage. Powder coating over zinc plate provides excellent abrasion and corrosion resistance for an enduring, attractive finish.

Easily configure gate operation to specific site requirements with unequalled Smart Touch Controller. PC software simplifies configuration and troubleshooting using Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.). Upload latest software, troubleshoot system and save operator configurations. Programmable dual or sequenced gate integration. Three configurable user relays plus optional Hy8Relay™ - an accessory module providing eight additional programmable relay outputs.

Connect and Report: Optional web based HyNet™ Gateway connects the perimeter gates/barriers with your security monitoring station. Securely report gate system tailgating, gate hits, failure to operate, and more, in real time to maintain perimeter security. Additionally, configure email alerts to communicate issues to installer, facility or security responders.

Listed and restricted to UL 325 usage class III, IV.
Note: See Options & Accessories for lock options. XtremeDrive™ System (patent pending) requires HySecurity XtremeDrive™ rack and a drive rail. Operator price includes 27 ft (8 m) of rack, but no drive rail. To ensure compatibility, it is recommended that HySecurity grooved (flangeless) drive rail or steel/aluminum angle iron be used. If mounting XtremeDrive™ to a flanged drive rail, the clearance between the flanges must be a minimum of 2 inches (5 cm).

To enable fully automatic operation, this gate operator requires a MINIMUM of one external entrapment protection sensor to monitor potential entrapment zones in either the open or close direction of travel. Visit www.hysecurity.com/gatesafety for more information on UL 325 standards and gate safety.

Operator Specifications
Sales Literature
Installation Manuals
Photos
Correctional slide gate models offer added security
Correctional slide gate models offer added security
Easy to integrate
Easy to integrate
Seamless synchronization
Seamless synchronization