1-800-321-9947 | Sales Support | Tech Support

SlideDriver 80 UPS

SlideDriver 80 UPS
UPS backup, industrial, heavy gate, 8,000 lb, 1 ft/s
SLIDEDRIVER 80 with UPS BACKUP is a powerful, rugged, industrial grade, hydraulic slide gate operator that exceeds all operator reliability, longevity, maintenance and security standards. Our most powerful two-wheel drive, hydraulic slide gate operator is designed for VERY heavy or long gates. The Uninterruptible DC Power Supply provides up to 3,000 ft of travel after AC power loss.*

Cycle up to 8,000 lb gates at 1 ft/s. The SlideDriver 80 is equipped with an AdvanceDrive wheel that runs on the top of the drive rail and an XtremeDrive™ wheel which engages a rack on the underside of the drive rail. This increases the pull force for large heavy industrial and high security gates. Powerful hydraulic motors rotate two compressed polyurethane AdvanceDrive™ wheels, smoothly cycling a rigid drive rail/gate. The robust 12 gauge steel chassis protects all moving parts and controls from vandalism and sabotage. Powder coating over zinc plate provides excellent abrasion and corrosion resistance for an enduring, attractive finish.

Retain full functionality during an AC power outage using HySecurity’s advanced DC Power Supply with HyCharger DC™, a powerful 50A three stage charger, custom built for continuous duty and long battery life. The DC Power Supply is a separate insulated and ventilated enclosure containing two sealed maintenance free AGM 110Ah, 12VDC batteries. Available in single phase only: Low voltage: 115V 60/50Hz (requires 30A branch circuit) or High voltage: 208-230V 60/50Hz (requires 15A branch circuit). Be certain to order the correct HyCharger DC™ voltage model as chargers are not field convertible.

Easily configure gate operation to specific site requirements with unequalled Smart Touch Controller. PC software simplifies configuration and troubleshooting using Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.). Upload latest software, troubleshoot system and save operator configurations. Programmable dual or sequenced gate integration. Three configurable user relays plus optional Hy8Relay™ - an accessory module providing eight additional programmable relay outputs.

Connect and Report: Optional web based HyNet™ Gateway connects the perimeter gates/barriers with your security monitoring station. Securely report gate system tailgating, gate hits, failure to operate, and more, in real time to maintain perimeter security. Additionally, configure email alerts to communicate issues to installer, facility or security responders.

Listed and restricted to UL 325 usage class III, IV.
Note: HySecurity’s DC Power Supply enclosure must be mounted within 10 ft (3 m) of the operator with a minimum of 2 gauge wire used to connect between the DC supply and gate operator. For longer distances, call HySecurity Tech Support. Solenoid lock is not available with UPS models. XtremeDrive™ System (patent pending) requires HySecurity XtremeDrive™ rack and a drive rail. Operator price includes 27 ft (8 m) of rack, but no drive rail. To ensure compatibility, it is recommended that HySecurity grooved (flangeless) drive rail or steel/aluminum angle iron be used. If mounting XtremeDrive™ to a flanged drive rail, the clearance between the flanges must be a minimum of 2 inches (5 cm).

To enable fully automatic operation, this gate operator requires a MINIMUM of one external entrapment protection sensor to monitor potential entrapment zones in either the open or close direction of travel. Visit www.hysecurity.com/gatesafety for more information on UL 325 standards and gate safety.

Operator Specifications
Sales Literature
Installation Manuals
Photos
Up to 3,000 ft after AC power loss
Up to 3,000 ft after AC power loss
Snowbrush and snow scraper kit
Snowbrush and snow scraper kit
UPS dependability
UPS dependability