1-800-321-9947 | Sales Support | Tech Support

SlideDriver 80

SlideDriver 80
Industrial, very heavy gate, 8,000 lb, 1 ft/s
SLIDEDRIVER 80 is a powerful, rugged, continuous duty, industrial grade, hydraulic slide gate operator that exceeds all operator reliability, longevity, maintenance and security standards. It''s our most powerful two-wheel drive, hydraulic slide gate operator and is designed for VERY heavy or long gates.

Cycle up to 8,000 lb gates at 1 ft/s. The SlideDriver 80 is equipped with an AdvanceDrive wheel that runs on the top of the drive rail and an XtremeDrive™ wheel which engages a rack on the underside of the drive rail. This increases the pull force for large heavy industrial and high security gates. Powerful hydraulic motors rotate two compressed polyurethane AdvanceDrive™ wheels, smoothly cycling a rigid drive rail/gate. The robust 12 gauge steel chassis protects all moving parts and controls from vandalism and sabotage. Powder coating over zinc plate provides excellent abrasion and corrosion resistance for an enduring, attractive finish.

Easily configure gate operation to specific site requirements with unequalled Smart Touch Controller. PC software simplifies configuration and troubleshooting using Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.). Upload latest software, troubleshoot system and save operator configurations. Programmable dual or sequenced gate integration. Three configurable user relays plus optional Hy8Relay™ - an accessory module providing eight additional programmable relay outputs.

Connect and Report: Optional web based HyNet™ Gateway connects the perimeter gates/barriers with your security monitoring station. Securely report gate system tailgating, gate hits, failure to operate, and more, in real time to maintain perimeter security. Additionally, configure email alerts to communicate issues to installer, facility or security responders.

Listed and restricted to UL 325 usage class III, IV.
Note: XtremeDrive™ System (patent pending) requires HySecurity XtremeDrive™ rack and a drive rail. Operator price includes 27 ft (8 m) of rack, but no drive rail. To ensure compatibility, it is recommended that HySecurity grooved (flangeless) drive rail or steel/aluminum angle iron be used. If mounting XtremeDrive™ to a flanged drive rail, the clearance between the flanges must be a minimum of 2 inches (5 cm).

To enable fully automatic operation, this gate operator requires a MINIMUM of one external entrapment protection sensor to monitor potential entrapment zones in either the open or close direction of travel. Visit www.hysecurity.com/gatesafety for more information on UL 325 standards and gate safety.

Operator Specifications
Sales Literature
Installation Manuals
Photos
Moves gate at 1 ft/s
Moves gate at 1 ft/s
Base Extension
Base Extension
Custom color
Custom color