1-800-321-9947 | Sales Support | Tech Support

SwingRiser 19-Twin UPS

SwingRiser 19-Twin UPS
UPS backup, twin posts, 1,600 lb, Open/Close: 19 seconds
SWINGRISER 19-TWIN with UPS BACKUP is an extremely-reliable and elegant, continuous duty, industrial grade, hydraulic swing gate operator. Its graceful, smooth lift and swing raises gate leaf a full 12 inches during the gate open cycle to clear obstacles like snow, rocks, curbs and road inclines. Optional locking pin mechanically locks, when gate gently lowers at end of its cycle. Frequently chosen for high profile or high security locations, HySecurity’s unique SwingRiser solves specialized site challenges with finesse. The Uninterruptible DC Power Supply provides 100 cycles UPS backup after an AC power loss.*

SwingRiser 19 twin opens or closes gate leaves, up to 1,600 lb and 16 ft width each, in 19 seconds. The HydraSupply, electrical controls and manual override are remotely located in a separate enclosure, up to 100 ft from the gate. SwingRiser outer posts are zinc flame sprayed for superior corrosion resistance. Standard SwingRiser posts are 80 inches (203 cm) tall, assembled as left hand or right hand and inward swing or outward swing, as well as 90° or 100° swing. Custom height SwingRiser posts can be ordered to fit your gate size. Ordering the correct SwingRiser configuration is critical as the speed and all elements described above cannot be field reconfigured. HySecurity provides a SwingRiser Order Form that must accompany every order to insure accuracy and customer satisfaction.

Retain full functionality during an AC power outage using HySecurity’s advanced DC Power Supply with HyCharger DC™, a powerful 50A three stage charger, custom built for continuous duty and long battery life. The DC Power Supply is a separate insulated and ventilated enclosure containing two sealed maintenance free AGM 110Ah, 12VDC batteries. Available in single phase only: Low voltage: 115V 60/50Hz (requires 30A branch circuit) or High voltage: 208-230V 60/50Hz (requires 15A branch circuit). Be certain to order the correct HyCharger DC™ voltage model as chargers are not field convertible.

Easily configure gate operation to specific site requirements with unequalled Smart Touch Controller. PC software simplifies configuration and troubleshooting using Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.). Upload latest software, troubleshoot system and save operator configurations. Programmable dual or sequenced gate integration. Three configurable user relays plus optional Hy8Relay™ - an accessory module providing eight additional programmable relay outputs.

Connect and Report: Optional web based HyNet™ Gateway connects the perimeter gates/barriers with your security monitoring station. Securely report gate system tailgating, gate hits, failure to operate, and more, in real time to maintain perimeter security. Additionally, configure email alerts to communicate issues to installer, facility or security responders.
Note: The top of the SwingRiser post must be mounted to a structural column or wall that will support the entire weight of the swing gate panel throughout its arc. Excessive speed, insufficient column support or insufficient footings may cause gate sag, premature post and actuator wear and other serious operator malfunction. HySecurity’s DC Power Supply enclosure must be mounted within 10 ft (3 m) of the operator with a minimum of 2 gauge wire used to connect between the DC supply and gate operator. For longer distances, call HySecurity Tech Support. HydraSupply enclosure may be located up to 100 ft (30.5 m) from post. For longer than 100 ft runs, call HySecurity for hose specifications. Up to 100 ft (30.5 m) runs require 1/4 inch hose/fittings. For runs longer than 50 ft AND installed in cold climates, which routinely get below 0° F (18° C), use 3/8 inch braided hose. Operator price includes up to 150 ft (45.7 m) of 1/4 inch hydraulic hose (custom cut to size by HySecurity according to installer''s field measurements). Hoses are pre-filled with hydraulic fluid and supplied with quick disconnects. Submit completed and signed operator and hose order forms with each order.

To enable fully automatic operation, this gate operator requires a MINIMUM of one external entrapment protection sensor to monitor potential entrapment zones in either the open or close direction of travel. Visit www.hysecurity.com/gatesafety for more information on UL 325 standards and gate safety.

Operator Specifications
Sales Literature
Installation Manuals
Photos
19 seconds open/close
19 seconds open/close
Extremely-reliable and elegant
Extremely-reliable and elegant
Moves a 1,600 lb gate
Moves a 1,600 lb gate
Worried about AC power outage? We've got you covered!
Worried about AC power outage? We've got you covered!