1-800-321-9947 | Sales Support | Tech Support

Single Acting DC

Single Acting DC
Universal* Wedge HPU Replacement
HYDRASUPPLY XL SINGLE ACTING HPU with UPS BACKUP outperforms and outlives other brand OEM HPU systems providing an attractive retrofit and feature improvement option at a fraction of the cost of complete wedge replacement, reducing gate downtime while maintaining high security. The compact, powerful, programmable, embedded controller eliminates costly, custom, PLC dependencies and facilitates vehicle barrier sequencing and ACP management. Installation requires minimal site work. The uninterruptible DC Power Supply provides hundreds of UPS backup cycles after AC power loss.

This ultra reliable (5 year warranty), heavy duty single acting (gravity down) DC wedge HPU is capable of up to hundreds of cycles after AC power loss with DC Power Supply w/HyCharger DC™.** Keep traffic moving with 3 - 5 seconds Open/Close, and secure with a 1 - 2 second FAST EFO. Compact hydraulics provide 7 gallons hydraulic fluid vs. up to 30 gallons required in competitor systems. Up to 3 accumulator backup cycles after power outage, dependent on wedge specs. Simple installation - light enough to install with loader or forklift.

Retain full functionality during an AC power outage using HySecurity’s advanced DC Power Supply with HyCharger DC™, a powerful 50A three stage charger, custom built for continuous duty and long battery life. The DC Power Supply is a separate insulated and ventilated enclosure containing two sealed maintenance free AGM 110Ah, 12VDC batteries. Available in single phase only: Low voltage: 115V 60/50Hz (requires 30A branch circuit) or High voltage: 208-230V 60/50Hz (requires 15A branch circuit). Be certain to order the correct HyCharger DC™ voltage model as chargers are not field convertible.

Easily configure gate operation to specific site requirements with unique and unequalled Smart Touch Controller. PC software simplifies configuration and troubleshooting using Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.). Upload latest software, troubleshoot system and save operator configurations. Programmable dual or sequenced gate integration. Three configurable user relays plus optional Hy8Relay™ - an accessory module providing eight additional programmable relay outputs.

Connect and Report: Optional web based HyNet™ Gateway connects the perimeter gates/barriers with your security control monitoring station. Securely report gate system tailgating, gate hits, failure to operate, and more, in real time to maintain perimeter security. Additionally, configure email alerts to communicate issues to installer, facility or security responders.
HySecurity’s DC Power Supply enclosure must be mounted within 10 ft (3 m) of the operator with a minimum of 2 gauge wire connecting the DC supply and wedge. For longer distances, call HySecurity Tech Support. The HydraSupply XL Universal HPU cabinet houses the hydraulic pump pack, motor, Smart Touch Controller, heater, batteries and accumulator. Wall or post mounted on a separate foundation erected on site. The ventilated cabinet, with optional heater, can be installed up to 80 feet (25 m) from the wedge. Half inch abrasion resistant, high pressure hoses connect the hydraulic cylinder in the wedge base frame to the HPU cabinet.

Note: Call for price quote on all HydraSupply XL HPUs

Operator Specifications
Sales Literature
Installation Manuals
Photos