1-800-321-9947 | Sales Support | Tech Support

HydraWedge SM50 Twin

HydraWedge  SM50 Twin
Twin, anti-ram crash, shallow mount, Open/Close: 3 seconds
HYDRAWEDGE™ SM50 TWIN defends high security sites worldwide with proven reliability and unparalleled performance. This high-cycle, shallow mount vehicle wedge barrier boasts the toughest domestic and international Crash Certifications. HydraWedge SM50 Twin provides high performance and uninterrupted security at a fraction of competitive system installation and maintenance expense.

HydraWedge SM50 has won more top security awards than any other crash barrier. The Security Industry of America (SIA) honored HydraWedge SM50 with its “Best Outdoor Perimeter Protection” award in 2016, and Government Security News awarded it with the “Best Gates, Fences, Barriers” 2016 award.

HySecurity’s exceptionally engineered and proven-reliable hydraulics and controls surpass high security site needs for uninterrupted, low maintenance and highly integrated systems. These secure and fast twin wedges open and close in 3 seconds and is rated for 400 cycles/hour usage divided between two wedges. Emergency Fast Operate (EFO) raises HydraWedge in only one second. Up to 6 accumulator cycles, divided between two wedges, after AC power loss. Two 8Ah batteries maintain low voltage to the controls for 24 hours after AC power loss for normal limited operation on accumulator. Order HydraWedge SM50 in 2.0 m, 2.5 m, 3.0 m, 3.5 m and 4.0 m plate widths.

The independently adjustable Wedges operate with two independent controls and one HydraSupply XL. The HydraSupply XL™ enclosure contains the Smart Touch Controller and hydraulic power unit. The powder coated steel chassis passed a 2,000 hour salt spray test providing optimum corrosion protection. Shallow wedge mount, minimal rebar and low concrete volume significantly reduces install effort, time and total cost. Optional fitted safety skirt and LED light bar available.

Easily configure gate operation to specific site requirements with unequalled Smart Touch Controller. PC software simplifies configuration and troubleshooting using Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.). Upload latest software, troubleshoot system and save operator configurations. Programmable dual or sequenced gate integration. Three configurable user relays plus optional Hy8Relay™ - an accessory module providing eight additional programmable relay outputs.

Connect and Report: Optional web based HyNet™ Gateway connects the perimeter gates/barriers with your security monitoring station. Securely report gate system tailgating, gate hits, failure to operate, and more, in real time to maintain perimeter security. Additionally, configure email alerts to communicate issues to installer, facility or security responders.
Note: HydraSupply XL enclosure may be located up to 80 ft (24.4 m) from wedge. Up to 50 ft (24.4 m) runs require 3/8 inch hose/fittings. Longer than 50 ft runs require 1/2 inch braided hose/fittings. Operator price includes up to 150 ft (45.7 m) of 3/8 inch hydraulic hose (custom cut to size by HySecurity according to installer''s field measurements). Hoses are pre-filled with hydraulic fluid and supplied with quick disconnects. The HydraWedge SM50 requires soil with a minimum load bearing capacity of 110 kN/Sq m (2,300 psf). The installation must provide adequate drainage to prevent water from building up in the wedge recess. Submit completed and signed HydraWedge operator and hose order forms with each order.

CALL FOR QUOTE. ONLY HYSECURITY AUTHORIZED DISTRIBUTORS AND INSTALLERS, trained or authorized by HySecurity in proper installation techniques, operation and maintenance, are eligible to purchase HySecurity’s Fortified Crash Barrier products. Training is periodically available and is required prior to the actual purchase or to receive Crash Project installation leads and referrals from HySecurity. See Crash Training at www.hysecurity.com.

Operator Specifications
Sales Literature
Installation Manuals